DragonOS-Community/DragonOS
1
1
Fork 0
mirror of https://github.com/DragonOS-Community/DragonOS.git synced 2025-06-09 07:06:47 +00:00
Code Issues Releases Wiki Activity

更改HPET的定时间隔为500us

Browse Source
This commit is contained in:
fslongjin 2022-07-12 09:39:35 +08:00
parent defb9e769c
commit 4208c56074
3 changed files with 6 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
kernel/driver/timers/HPET/HPET.c
View File

@ -164,7 +164,7 @@ void HPET_enable()
apic_make_rte_entry(&entry, 34, IO_APIC_FIXED, DEST_PHYSICAL, IDLE, POLARITY_HIGH, IRR_RESET, EDGE_TRIGGER, MASKED, 0); apic_make_rte_entry(&entry, 34, IO_APIC_FIXED, DEST_PHYSICAL, IDLE, POLARITY_HIGH, IRR_RESET, EDGE_TRIGGER, MASKED, 0);
// 计算HPET0间隔多少个时钟周期触发一次中断 // 计算HPET0间隔多少个时钟周期触发一次中断
uint64_t clks_to_intr = 0.001 * HPET0_INTERVAL * HPET_freq; uint64_t clks_to_intr = 0.000001 * HPET0_INTERVAL * HPET_freq;
// kdebug("clks_to_intr=%#ld", clks_to_intr); // kdebug("clks_to_intr=%#ld", clks_to_intr);
if (clks_to_intr <= 0 || clks_to_intr > (HPET_freq * 8)) if (clks_to_intr <= 0 || clks_to_intr > (HPET_freq * 8))
{ {
@ -177,7 +177,7 @@ void HPET_enable()
io_mfence(); io_mfence();
*(uint64_t *)(HPET_REG_BASE + TIM0_CONF) = 0x004c; // 设置定时器0为周期定时，边沿触发，默认投递到IO APIC的2号引脚(看conf寄存器的高32bit，哪一位被置1，则可以投递到哪一个I/O apic引脚) *(uint64_t *)(HPET_REG_BASE + TIM0_CONF) = 0x004c; // 设置定时器0为周期定时，边沿触发，默认投递到IO APIC的2号引脚(看conf寄存器的高32bit，哪一位被置1，则可以投递到哪一个I/O apic引脚)
io_mfence(); io_mfence();
*(uint64_t *)(HPET_REG_BASE + TIM0_COMP) = clks_to_intr; // 5ms触发一次中断 *(uint64_t *)(HPET_REG_BASE + TIM0_COMP) = clks_to_intr;
io_mfence(); io_mfence();

2
kernel/driver/timers/HPET/HPET.h
View File

@ -6,7 +6,7 @@
#define E_HPET_INIT_FAILED 1 #define E_HPET_INIT_FAILED 1
#define HPET0_INTERVAL 5 // HPET0定时器的中断间隔为5ms #define HPET0_INTERVAL 500 // HPET0定时器的中断间隔为500us
int HPET_init(); int HPET_init();
/** /**

4
kernel/time/timer.h
View File

@ -7,7 +7,9 @@
uint64_t volatile timer_jiffies = 0; // 系统时钟计数 uint64_t volatile timer_jiffies = 0; // 系统时钟计数
// 计算接下来n毫秒对应的系统时间片 // 计算接下来n毫秒对应的系统时间片
#define cal_next_n_ms_jiffies(expire_ms) (timer_jiffies + expire_ms / 5 + ((expire_ms % HPET0_INTERVAL) ? 1 : 0)) #define cal_next_n_ms_jiffies(expire_ms) (timer_jiffies + 1000*expire_ms / HPET0_INTERVAL + ((1000*expire_ms % HPET0_INTERVAL) ? 1 : 0))
// 计算接下来n微秒对应的系统时间片
#define cal_next_n_us_jiffies(expire_us) (timer_jiffies + expire_us / HPET0_INTERVAL + ((expire_us % HPET0_INTERVAL) ? 1 : 0))
void timer_init(); void timer_init();