mirror of
https://github.com/DragonOS-Community/DragonOS.git
synced 2025-06-09 19:36:47 +00:00
308 lines
9.5 KiB
C
308 lines
9.5 KiB
C
#pragma once
|
||
#include <common/sys/types.h>
|
||
|
||
// usb设备在pci总线上的class
|
||
#define USB_CLASS 0xC
|
||
#define USB_SUBCLASS 0x3
|
||
|
||
// 不同的usb设备在pci总线上的prog IF
|
||
#define USB_TYPE_UHCI 0x0
|
||
#define USB_TYPE_OHCI 0x10
|
||
#define USB_TYPE_EHCI 0x20
|
||
#define USB_TYPE_XHCI 0x30
|
||
#define USB_TYPE_UNSPEC 0x80 // Unspecified
|
||
#define USB_TYPE_DEVICE 0xfe // USB Device(Not controller)
|
||
|
||
// Reset wait times(milliseconds) ,USB 2.0 specs, page 153, section 7.1.7.5, paragraph 3
|
||
#define USB_TIME_RST_RH 50 // reset on a root hub
|
||
#define USB_TIME_RST_MIN 10 // minimum delay for a reset
|
||
#define USB_TIME_RST_NOMORE 3 // No more than this between resets for root hubs
|
||
#define USB_TIME_RST_REC 10 // reset recovery
|
||
|
||
/**
|
||
* @brief usb描述符的头部
|
||
*
|
||
* String Descriptor:
|
||
* String Language Descriptor:
|
||
* 先获取头部，然后根据长度申请空间，再获取整个string desc
|
||
*/
|
||
struct usb_desc_header
|
||
{
|
||
uint8_t len; // 整个描述符的大小（字节）
|
||
uint8_t type;
|
||
} __attribute__((packed));
|
||
|
||
/**
|
||
* @brief usb 设备描述符
|
||
*
|
||
*/
|
||
struct usb_device_desc
|
||
{
|
||
uint8_t len;
|
||
uint8_t type;
|
||
uint16_t usb_version;
|
||
uint8_t _class;
|
||
uint8_t subclass;
|
||
uint8_t protocol;
|
||
uint8_t max_packet_size;
|
||
|
||
uint16_t vendor_id;
|
||
uint16_t product_id;
|
||
uint16_t device_rel;
|
||
uint8_t manufacturer_index;
|
||
uint8_t procuct_index;
|
||
|
||
uint8_t serial_index;
|
||
uint8_t config; // number of configurations
|
||
} __attribute__((packed));
|
||
|
||
/**
|
||
* @brief usb设备配置信息描述符
|
||
*
|
||
*/
|
||
struct usb_config_desc
|
||
{
|
||
uint8_t len; // 当前描述符的大小（字节）
|
||
uint8_t type; // USB_DT_CONFIG
|
||
uint16_t total_len; /*
|
||
Total length of data returned for this
|
||
configuration. Includes the combined length
|
||
of all descriptors (configuration, interface,
|
||
endpoint, and class- or vendor-specific)
|
||
returned for this configuration
|
||
*/
|
||
uint8_t num_interfaces; // 当前conf对应的接口数量
|
||
uint8_t value; /*
|
||
Value to use as an argument to the
|
||
SetConfiguration() request to select this
|
||
configuration
|
||
*/
|
||
uint8_t index; // Index of string descriptor describing this configuration
|
||
uint8_t bmAttr; /*
|
||
Configuration characteristics:
|
||
D7: Reserved (要设置为1)
|
||
D6: Self-powered
|
||
D5: Remote Wakeup
|
||
D4...0: Reserved (设置为0)
|
||
*/
|
||
uint8_t max_power; /*
|
||
当这个设备满载时，为在这个conf上提供对应的功能，需要消耗的电流值。
|
||
当设备是在High-speed时，这里的单位是2mA （也就是说，值为50，代表最大消耗100mA的电流）
|
||
当设备运行在Gen X speed时，这里的单位是8mA
|
||
*/
|
||
} __attribute__((packed));
|
||
|
||
/**
|
||
* @brief usb接口描述符
|
||
*
|
||
*/
|
||
struct usb_interface_desc
|
||
{
|
||
uint8_t len;
|
||
uint8_t type; // USB_DT_INTERFACE
|
||
uint8_t interface_number; // 当前接口序号（从0开始的）
|
||
uint8_t alternate_setting; // used to select alt. setting
|
||
uint8_t num_endpoints; // 当前interface的端点数量
|
||
uint8_t interface_class; // Class code
|
||
uint8_t interface_sub_class; // Sub class code
|
||
uint8_t interface_protocol; // 协议 These codes are qualified by the value of thebInterfaceClass and the
|
||
// bInterfaceSubClass fields.
|
||
uint8_t index; // index of String Descriptor describing this interface
|
||
} __attribute__((packed));
|
||
|
||
/**
|
||
* @brief usb端点描述符
|
||
*
|
||
* 详见usb3.2 Specification Table 9-26
|
||
*/
|
||
struct usb_endpoint_desc
|
||
{
|
||
uint8_t len;
|
||
uint8_t type; // descriptor type
|
||
uint8_t endpoint_addr; /* Bit 3...0: The endpoint number
|
||
Bit 6...4: Reserved, reset to zero
|
||
Bit 7: Direction, ignored for
|
||
control endpoints
|
||
0 = OUT endpoint
|
||
1 = IN endpoint
|
||
*/
|
||
uint8_t attributes;
|
||
uint16_t max_packet;
|
||
uint8_t interval;
|
||
};
|
||
|
||
// 从endpoint描述符中获取max burst size大小
|
||
#define usb_get_max_burst_from_ep(__ep_desc) (((__ep_desc)->max_packet & 0x1800) >> 11)
|
||
|
||
/**
|
||
* @brief usb设备请求包
|
||
*
|
||
*/
|
||
struct usb_request_packet_t
|
||
{
|
||
uint8_t request_type;
|
||
uint8_t request;
|
||
uint16_t value;
|
||
|
||
uint16_t index;
|
||
uint16_t length;
|
||
} __attribute__((packed));
|
||
// usb设备请求包的request_type字段的值
|
||
#define __USB_REQ_TYPE_H2D 0x00
|
||
#define __USB_REQ_TYPE_D2H 0x80
|
||
|
||
#define __USB_REQ_TYPE_STANDARD 0x00
|
||
#define __USB_REQ_TYPE_CLASS 0x20
|
||
#define __USB_REQ_TYPE_VENDOR 0x40
|
||
#define __USB_REQ_TYPE_RSVD 0x60
|
||
|
||
#define __USB_REQ_TYPE_DEVICE 0x00
|
||
#define __USB_REQ_TYPE_INTERFACE 0x01
|
||
#define __USB_REQ_TYPE_ENDPOINT 0x02
|
||
#define __USB_REQ_TYPE_OTHER 0x03
|
||
|
||
#define USB_REQ_TYPE_GET_REQUEST (__USB_REQ_TYPE_D2H | __USB_REQ_TYPE_STANDARD | __USB_REQ_TYPE_DEVICE)
|
||
#define USB_REQ_TYPE_SET_REQUEST (__USB_REQ_TYPE_H2D | __USB_REQ_TYPE_STANDARD | __USB_REQ_TYPE_DEVICE)
|
||
#define USB_REQ_TYPE_GET_INTERFACE_REQUEST (__USB_REQ_TYPE_D2H | __USB_REQ_TYPE_STANDARD | __USB_REQ_TYPE_INTERFACE)
|
||
#define USB_REQ_TYPE_SET_INTERFACE (__USB_REQ_TYPE_H2D | __USB_REQ_TYPE_STANDARD | __USB_REQ_TYPE_INTERFACE)
|
||
#define USB_REQ_TYPE_SET_CLASS_INTERFACE (__USB_REQ_TYPE_H2D | __USB_REQ_TYPE_CLASS | __USB_REQ_TYPE_INTERFACE)
|
||
|
||
// device requests
|
||
enum
|
||
{
|
||
USB_REQ_GET_STATUS = 0,
|
||
USB_REQ_CLEAR_FEATURE,
|
||
USB_REQ_SET_FEATURE = 3,
|
||
USB_REQ_SET_ADDRESS = 5,
|
||
USB_REQ_GET_DESCRIPTOR = 6,
|
||
USB_REQ_SET_DESCRIPTOR,
|
||
USB_REQ_GET_CONFIGURATION,
|
||
USB_REQ_SET_CONFIGURATION,
|
||
// interface requests
|
||
USB_REQ_GET_INTERFACE,
|
||
USB_REQ_SET_INTERFACE,
|
||
// standard endpoint requests
|
||
USB_REQ_SYNCH_FRAME,
|
||
USB_REQ_SET_ENCRYPTION,
|
||
USB_REQ_GET_ENCRYPTION,
|
||
USB_REQ_SET_HANDSHAKE,
|
||
USB_REQ_GET_HANDSHAKE,
|
||
USB_REQ_SET_CONNECTION,
|
||
USB_REQ_SET_SECURITY_DATA,
|
||
USB_REQ_GET_SECURITY_DATA,
|
||
USB_REQ_SET_WUSB_DATA,
|
||
USB_REQ_LOOPBACK_DATA_WRITE,
|
||
USB_REQ_LOOPBACK_DATA_READ,
|
||
USB_REQ_SET_INTERFACE_DS,
|
||
USB_REQ_GET_FW_STATUS = 26,
|
||
USB_REQ_SET_FW_STATUS,
|
||
USB_REQ_SET_SEL = 48,
|
||
USB_REQ_SET_ISOCH_DELAY,
|
||
// Device specific
|
||
USB_REQ_GET_MAX_LUNS = 0xFE,
|
||
USB_REQ_BULK_ONLY_RESET
|
||
};
|
||
|
||
// Descriptor types
|
||
enum
|
||
{
|
||
USB_DT_DEVICE = 1,
|
||
USB_DT_CONFIG,
|
||
USB_DT_STRING,
|
||
USB_DT_INTERFACE,
|
||
USB_DT_ENDPOINT,
|
||
USB_DT_DEVICE_QUALIFIER,
|
||
USB_DT_OTHER_SPEED_CONFIG,
|
||
USB_DT_INTERFACE_POWER,
|
||
USB_DT_OTG,
|
||
USB_DT_DEBUG,
|
||
USB_DT_INTERFACE_ASSOSIATION,
|
||
USB_DT_BOS = 15,
|
||
USB_DT_DEVICE_CAPABILITY,
|
||
|
||
USB_DT_HID = 0x21,
|
||
USB_DT_HID_REPORT,
|
||
USB_DT_HID_PHYSICAL,
|
||
|
||
USB_DT_INTERFACE_FUNCTION = 0x24,
|
||
USB_DT_ENDPOINT_FUNCTION,
|
||
|
||
// HUB = 0x29
|
||
|
||
USB_DT_SUPERSPEED_USB_ENDPOINT_COMPANION = 48,
|
||
USB_DT_SUPERSPEEDPLUS_ISOCHRONOUS_ENDPOINT_COMPANION,
|
||
};
|
||
|
||
// transfer types (Endpoint types) (USB 2.0 page 270)
|
||
enum
|
||
{
|
||
USB_EP_CONTROL = 0,
|
||
USB_EP_ISOCHRONOUS,
|
||
USB_EP_BULK,
|
||
USB_EP_INTERRUPT
|
||
};
|
||
|
||
/**
|
||
* @brief 该宏定义用于声明usb请求包，并初始化其中的各个字段
|
||
*
|
||
*/
|
||
#define DECLARE_USB_PACKET(pak_name, _trans_req_type, _trans_request, _trans_value, _trans_index, _transfer_length) \
|
||
struct usb_request_packet_t pak_name = {0}; \
|
||
pak_name.request_type = (_trans_req_type); \
|
||
pak_name.request = (_trans_request); \
|
||
pak_name.value = (_trans_value); \
|
||
pak_name.index = (_trans_index); \
|
||
pak_name.length = (_transfer_length);
|
||
|
||
/*
|
||
usb class codes
|
||
refs: https://www.usb.org/defined-class-codes
|
||
*/
|
||
enum
|
||
{
|
||
USB_CLASS_IF = 0x00,
|
||
USB_CLASS_AUDIO,
|
||
USB_CLASS_CDC,
|
||
USB_CLASS_HID,
|
||
USB_CLASS_PHYSICAL = 0x05,
|
||
USB_CLASS_IMAGE,
|
||
USB_CLASS_PRINTER,
|
||
USB_CLASS_MASS_STORAGE,
|
||
USB_CLASS_HUB,
|
||
USB_CLASS_CDC_DATA,
|
||
USB_CLASS_SMART_CARD,
|
||
USB_CLASS_CONTENT_SEC = 0x0d,
|
||
USB_CLASS_VIDEO,
|
||
USB_CLASS_PERSONAL_HEALTHCARE = 0x0f,
|
||
USB_CLASS_AV,
|
||
USB_CLASS_BILLBOARD,
|
||
USB_CLASS_TYPEC_BRIDGE,
|
||
USB_CLASS_I3C = 0x3c,
|
||
USB_CLASS_DIAGNOSTIC = 0xdc,
|
||
USB_CLASS_WIRELESS_CTRL = 0xe0,
|
||
USB_CLASS_MISC = 0xef,
|
||
USB_CLASS_APP_SPEC = 0xfe,
|
||
USB_CLASS_VENDOR_SPEC = 0XFF,
|
||
};
|
||
|
||
/**
|
||
* @brief usb hid descriptor的结构体
|
||
*
|
||
*/
|
||
struct usb_hid_desc
|
||
{
|
||
uint8_t len;
|
||
uint8_t type; // USB_DT_HID
|
||
uint16_t bcdHID; // 标识HIDClass规范版本的数字表达式。
|
||
|
||
uint8_t country_code;
|
||
uint8_t descriptors_num; // the number of class descriptors
|
||
uint8_t desc_type; // Constant name identifying type of class descriptor
|
||
uint16_t report_desc_len; // Report descriptor的大小
|
||
};
|
||
|
||
/**
|
||
* @brief 初始化usb驱动程序
|
||
*
|
||
*/
|
||
int usb_init(); |