Refactor the crate linux-boot-params

framework/libs/linux-bzimage/boot-params/src/lib.rs

@@ -1,6 +1,4 @@
-#![feature(offset_of)]
-
-//! The Linux Boot Protocol boot_params definition.
+//! The definition of Linux Boot Protocol boot_params struct.
 //!
 //! The bootloader will deliver the address of the `BootParams` struct
 //! as the argument of the kernel entrypoint. So we must define a Linux
@@ -8,8 +6,104 @@
 //! currently not needed by Asterinas.
 //!
 
+#![feature(offset_of)]
 #![cfg_attr(not(test), no_std)]
 
+/// Magic stored in the boot protocol header.
+pub const LINUX_BOOT_HEADER_MAGIC: u32 = 0x53726448;
+
+/// Linux 32/64-bit Boot Protocol parameter struct.
+///
+/// Originally defined in the linux source tree:
+/// `linux/arch/x86/include/uapi/asm/bootparam.h`
+#[derive(Copy, Clone, Debug)]
+#[repr(C, packed)]
+pub struct BootParams {
+    pub screen_info: ScreenInfo,        /* 0x000 */
+    pub apm_bios_info: ApmBiosInfo,     /* 0x040 */
+    pub _pad2: [u8; 4],                 /* 0x054 */
+    pub tboot_addr: u64,                /* 0x058 */
+    pub ist_info: IstInfo,              /* 0x060 */
+    pub acpi_rsdp_addr: u64,            /* 0x070 */
+    pub _pad3: [u8; 8],                 /* 0x078 */
+    pub hd0_info: [u8; 16],             /* obsolete! 0x080 */
+    pub hd1_info: [u8; 16],             /* obsolete! 0x090 */
+    pub sys_desc_table: SysDescTable,   /* obsolete! 0x0a0 */
+    pub olpc_ofw_header: OlpcOfwHeader, /* 0x0b0 */
+    pub ext_ramdisk_image: u32,         /* 0x0c0 */
+    pub ext_ramdisk_size: u32,          /* 0x0c4 */
+    pub ext_cmd_line_ptr: u32,          /* 0x0c8 */
+    pub _pad4: [u8; 112],               /* 0x0cc */
+    pub cc_blob_address: u32,           /* 0x13c */
+    pub edid_info: EdidInfo,            /* 0x140 */
+    pub efi_info: EfiInfo,              /* 0x1c0 */
+    pub alt_mem_k: u32,                 /* 0x1e0 */
+    pub scratch: u32,                   /* Scratch field! 0x1e4 */
+    pub e820_entries: u8,               /* 0x1e8 */
+    pub eddbuf_entries: u8,             /* 0x1e9 */
+    pub edd_mbr_sig_buf_entries: u8,    /* 0x1ea */
+    pub kbd_status: u8,                 /* 0x1eb */
+    pub secure_boot: u8,                /* 0x1ec */
+    pub _pad5: [u8; 2],                 /* 0x1ed */
+    pub sentinel: u8,                   /* 0x1ef */
+    pub _pad6: [u8; 1],                 /* 0x1f0 */
+    pub hdr: SetupHeader,               /* setup header 0x1f1 */
+    pub _pad7: [u8; 0x290 - 0x1f1 - core::mem::size_of::<SetupHeader>()],
+    pub edd_mbr_sig_buffer: [u32; EDD_MBR_SIG_MAX], /* 0x290 */
+    pub e820_table: [BootE820Entry; E820_MAX_ENTRIES_ZEROPAGE], /* 0x2d0 */
+    pub _pad8: [u8; 48],                            /* 0xcd0 */
+    pub eddbuf: [EddInfo; EDDMAXNR],                /* 0xd00 */
+    pub _pad9: [u8; 276],                           /* 0xeec */
+}
+
+/// Linux Boot Protocol header.
+///
+/// Originally defined in the linux source tree:
+/// `linux/arch/x86/include/uapi/asm/bootparam.h`
+#[derive(Copy, Clone, Debug)]
+#[repr(C, packed)]
+pub struct SetupHeader {
+    pub setup_sects: u8,
+    pub root_flags: u16,
+    pub syssize: u32,
+    pub ram_size: u16,
+    pub vid_mode: u16,
+    pub root_dev: u16,
+    pub boot_flag: u16,
+    pub jump: u16,
+    pub header: u32,
+    pub version: u16,
+    pub realmode_swtch: u32,
+    pub start_sys_seg: u16,
+    pub kernel_version: u16,
+    pub type_of_loader: u8,
+    pub loadflags: u8,
+    pub setup_move_size: u16,
+    pub code32_start: u32,
+    pub ramdisk_image: u32,
+    pub ramdisk_size: u32,
+    pub bootsect_kludge: u32,
+    pub heap_end_ptr: u16,
+    pub ext_loader_ver: u8,
+    pub ext_loader_type: u8,
+    pub cmd_line_ptr: u32,
+    pub initrd_addr_max: u32,
+    pub kernel_alignment: u32,
+    pub relocatable_kernel: u8,
+    pub min_alignment: u8,
+    pub xloadflags: u16,
+    pub cmdline_size: u32,
+    pub hardware_subarch: u32,
+    pub hardware_subarch_data: u64,
+    pub payload_offset: u32,
+    pub payload_length: u32,
+    pub setup_data: u64,
+    pub pref_address: u64,
+    pub init_size: u32,
+    pub handover_offset: u32,
+    pub kernel_info_offset: u32,
+}
+
 #[derive(Copy, Clone, Debug)]
 #[repr(C, packed)]
 pub struct ScreenInfo {
@@ -111,57 +205,6 @@ pub struct EfiInfo {
     pub efi_memmap_hi: u32,
 }
 
-/// Magic stored in SetupHeader.header.
-pub const LINUX_BOOT_HEADER_MAGIC: u32 = 0x53726448;
-
-/// Linux Boot Protocol Header.
-///
-/// Originally defined in the linux source tree:
-/// `linux/arch/x86/include/uapi/asm/bootparam.h`
-#[derive(Copy, Clone, Debug)]
-#[repr(C, packed)]
-pub struct SetupHeader {
-    pub setup_sects: u8,
-    pub root_flags: u16,
-    pub syssize: u32,
-    pub ram_size: u16,
-    pub vid_mode: u16,
-    pub root_dev: u16,
-    pub boot_flag: u16,
-    pub jump: u16,
-    pub header: u32,
-    pub version: u16,
-    pub realmode_swtch: u32,
-    pub start_sys_seg: u16,
-    pub kernel_version: u16,
-    pub type_of_loader: u8,
-    pub loadflags: u8,
-    pub setup_move_size: u16,
-    pub code32_start: u32,
-    pub ramdisk_image: u32,
-    pub ramdisk_size: u32,
-    pub bootsect_kludge: u32,
-    pub heap_end_ptr: u16,
-    pub ext_loader_ver: u8,
-    pub ext_loader_type: u8,
-    pub cmd_line_ptr: u32,
-    pub initrd_addr_max: u32,
-    pub kernel_alignment: u32,
-    pub relocatable_kernel: u8,
-    pub min_alignment: u8,
-    pub xloadflags: u16,
-    pub cmdline_size: u32,
-    pub hardware_subarch: u32,
-    pub hardware_subarch_data: u64,
-    pub payload_offset: u32,
-    pub payload_length: u32,
-    pub setup_data: u64,
-    pub pref_address: u64,
-    pub init_size: u32,
-    pub handover_offset: u32,
-    pub kernel_info_offset: u32,
-}
-
 /// The E820 types known to the kernel.
 ///
 /// Originally defined in the linux source tree:
@@ -175,32 +218,8 @@ pub enum E820Type {
     Nvs = 4,
     Unusable = 5,
     Pmem = 7,
-    /*
-     * This is a non-standardized way to represent ADR or
-     * NVDIMM regions that persist over a reboot.
-     *
-     * The kernel will ignore their special capabilities
-     * unless the CONFIG_X86_PMEM_LEGACY=y option is set.
-     *
-     * ( Note that older platforms also used 6 for the same
-     *   type of memory, but newer versions switched to 12 as
-     *   6 was assigned differently. Some time they will learn... )
-     */
     Pram = 12,
-    /*
-     * Special-purpose memory is indicated to the system via the
-     * EFI_MEMORY_SP attribute. Define an e820 translation of this
-     * memory type for the purpose of reserving this range and
-     * marking it with the IORES_DESC_SOFT_RESERVED designation.
-     */
     SoftReserved = 0xefffffff,
-    /*
-     * Reserved RAM used by the kernel itself if
-     * CONFIG_INTEL_TXT=y is enabled, memory of this type
-     * will be included in the S3 integrity calculation
-     * and so should not include any memory that the BIOS
-     * might alter over the S3 transition:
-     */
     ReservedKern = 128,
 }
 
@@ -239,61 +258,6 @@ pub struct EddInfo {
 const EDD_MBR_SIG_MAX: usize = 16;
 const EDDMAXNR: usize = 6;
 
-/// Linux 32/64-bit Boot Protocol parameter struct.
-///
-/// Originally defined in the linux source tree:
-/// `linux/arch/x86/include/uapi/asm/bootparam.h`
-#[derive(Copy, Clone, Debug)]
-#[repr(C, packed)]
-pub struct BootParams {
-    pub screen_info: ScreenInfo,        /* 0x000 */
-    pub apm_bios_info: ApmBiosInfo,     /* 0x040 */
-    pub _pad2: [u8; 4],                 /* 0x054 */
-    pub tboot_addr: u64,                /* 0x058 */
-    pub ist_info: IstInfo,              /* 0x060 */
-    pub acpi_rsdp_addr: u64,            /* 0x070 */
-    pub _pad3: [u8; 8],                 /* 0x078 */
-    pub hd0_info: [u8; 16],             /* obsolete! 0x080 */
-    pub hd1_info: [u8; 16],             /* obsolete! 0x090 */
-    pub sys_desc_table: SysDescTable,   /* obsolete! 0x0a0 */
-    pub olpc_ofw_header: OlpcOfwHeader, /* 0x0b0 */
-    pub ext_ramdisk_image: u32,         /* 0x0c0 */
-    pub ext_ramdisk_size: u32,          /* 0x0c4 */
-    pub ext_cmd_line_ptr: u32,          /* 0x0c8 */
-    pub _pad4: [u8; 112],               /* 0x0cc */
-    pub cc_blob_address: u32,           /* 0x13c */
-    pub edid_info: EdidInfo,            /* 0x140 */
-    pub efi_info: EfiInfo,              /* 0x1c0 */
-    pub alt_mem_k: u32,                 /* 0x1e0 */
-    pub scratch: u32,                   /* Scratch field! 0x1e4 */
-    pub e820_entries: u8,               /* 0x1e8 */
-    pub eddbuf_entries: u8,             /* 0x1e9 */
-    pub edd_mbr_sig_buf_entries: u8,    /* 0x1ea */
-    pub kbd_status: u8,                 /* 0x1eb */
-    pub secure_boot: u8,                /* 0x1ec */
-    pub _pad5: [u8; 2],                 /* 0x1ed */
-    /*
-     * The sentinel is set to a nonzero value (0xff) in header.S.
-     *
-     * A bootloader is supposed to only take setup_header and put
-     * it into a clean boot_params buffer. If it turns out that
-     * it is clumsy or too generous with the buffer, it most
-     * probably will pick up the sentinel variable too. The fact
-     * that this variable then is still 0xff will let kernel
-     * know that some variables in boot_params are invalid and
-     * kernel should zero out certain portions of boot_params.
-     */
-    pub sentinel: u8,     /* 0x1ef */
-    pub _pad6: [u8; 1],   /* 0x1f0 */
-    pub hdr: SetupHeader, /* setup header 0x1f1 */
-    pub _pad7: [u8; 0x290 - 0x1f1 - core::mem::size_of::<SetupHeader>()],
-    pub edd_mbr_sig_buffer: [u32; EDD_MBR_SIG_MAX], /* 0x290 */
-    pub e820_table: [BootE820Entry; E820_MAX_ENTRIES_ZEROPAGE], /* 0x2d0 */
-    pub _pad8: [u8; 48],                            /* 0xcd0 */
-    pub eddbuf: [EddInfo; EDDMAXNR],                /* 0xd00 */
-    pub _pad9: [u8; 276],                           /* 0xeec */
-}
-
 #[cfg(test)]
 mod tests {
     use super::*;